Pica8 OpenFlow switch

Pica8 3930 Switch

Product Feature     Brochure Download

Hardware Features Non-blocking 48 10GbE SFP+ ports
1 RJ45 serial console port
1U height for standard rack 
Front-to-rear airflow design 
Redundant power suppliers hot pluggable
Software Compatibility Support layer 2/3 switching/routing capabilities
Support OpenFlow 1.3 switching capability
Support IPv6 routing capability
Software support: PicOS 2.0.4, Open vSwitch 1.10

Hardware and Installation Feature

Connectors Non-blocking 48 10GbE SFP+ ports
1 10/100/1000 BASE-T management ports
1 serial console port – 115,200 Baud rate
Dimensions Size (HxWxD Inches):
1.69(H)x 17.13(W)x 15.5(D)
Weight: 16.28(lbs)
Power Supply Nominal Input Voltages: 110V & 240V
Input Frequency: 50/60 Hz
Power Draw: 195W
LEDs Per RJ45 port: Speed, Link/ Activity
Per SFP+ port: Status, Rx, Tx, Link
Per device: Power, Status
Performance Forwarding modes: Store-and-forward/Cut-through
Throughput rate: 960Gbps, Forwarding speed: 720 Mpps
latency: average 1 µs for 64-bytes frames
Packet buffer embedded in chip: 9 MB
Mean Time Between Failure (MTBF): 198,185 hours
Control Processor Freescale MPC8548
System memory DDR SDRAM 512MB
Boot flash size 32MB
Compact flash size 2GB
Safety Agency Certifications IEC 60950-1 : 2005

Software Feature

All equipped PicOS network operating system :

  • L2 features - STP/RSTP/MSTP, LACP, QoS, 802.1q VLAN, LLDP, ACL
  • L3 features - OSPF/ECMP, RIP, PIM-SM, IGMP, IPv6
  • OpenFlow - Openflow 1.3, OvS 1.10 release (compliant to OF 1.3 standard)
  • Management - VRRP, IPFIX, CLI, SNMP, TACACS AAA